Steel Block Swage U-Channel & 6 Hammer Punches Dapping Forming Shaping Metals

STEEL
SWAGE U-CHANNEL
FORMING BLOCK & HAMMER PUNCHES
SWAGE FORMING & SHAPING TOOL
A tool steel
Swage Block with 1/2 round U-Channels/Grooves and a 90° V-Groove on the bottom
of the block. The hardened tool Steel swage has 6 half round channels used for
forming, along with a 90° V-groove on the bottom side for bending.
The punches
are like hammers each one is made to use with the matching grooves of the
block.  Swage come with 6 hammer- punches
which correspond to the grooves of the swage block.
A very well made forming and
shaping
tool, with a good finish, channels
are smooth and polished.
SPECIFICATIONS:
JETS Product # 0407-29776
–
Punch
Diameters:
8.3mm – 10.3mm
– 13.8mm – 17.1mm  – 20.4mm – 23.3mm
–
Block Dimensions:
62.mm x
165mm x 23.5mm
–
2-7/16″
x 6-1/2″  15/16″
–
Weight: Block & Punches 4.6 Pounds – 2.1Kg
NOTE:
Visit
JETSTOOLS
ebay Store Listings, where
you can see many more Forming & Dapping Blocks,  Anvils, Steel
and Wooden Blocks, Hammers and Forming Tools along with a selection of many
more
J
ewelers
E
quipment
T
ools
&
S
upplies
.
JETSINC.
PFE
4L8z   4289 715
CKP  Z M